|
|
|
Services
|
New
Service! |
|
|
Plating
of Plastic for interior and exterior applications |
| |
|
|
Plating
of Aluminum |
|
Billet
aluminum plates the best. Cast aluminum by nature is very porous
and has a great deal of pitting. Chrome plating will not cover
pitting. If you have a cast aluminum part that is pitted and
requires a show quality finish, let us know before processing
your order. Using our process of acid copper plating and hand
polishing we can remove most of the pitting, however depending
upon the casting of the part it may not be possible to remove
all the pitting. You will be notified if your cast part will not
be free of pits.
|
|
|
Plating
of Aluminum Intakes |
|
Aluminum
intakes are cast aluminum and will have some pitting. The
pitting is in the part due to the casting, not the plating. If
your intake is severely pitted we will notify you before
plating. New intakes plate the best. Yes, we can plate your used
intake, but extremely old intakes that have many miles tend to
absorb oil and gas into the part which results in pitting.
Installation of your intake will require that washers be used
under the intake bolts.
|
|
Brass
plates very well. We also repair holes, cracks and dents on brass
parts.
|
|
We
provide a complete bumper restoration service. We straighten, repair
dents/cracks and fill holes. (Help us out! Please mark or note any
repairs you know are needed.) All bumpers are stripped down to the
bare metal (sand blasted on the back), all repairs including
straightening, realignment, dent and wave removal are then completed,
the bumper is polished to a mirror finish and triple plated with
copper, nickel, and chrome. We take great pride in our bumpers and
provide you with the very best restoration service to finish your
bumpers. So if you’re looking for a cheap job, go elsewhere.
|
|
Aluminum
blowers, intakes, rear ends…if you prefer the polished look on your
parts rather than chrome plating, we can custom polish your parts
100%. Also stainless steel—we offer straightening and repair,
removal of dents and dings on trim and hubcaps. We also polish brass
and copper parts.
|
|
Plating of
Pot Metal, Die Cast and White Metal |
|
Due
to the natural deterioration of this type of material it requires a
great deal of work and time to restore. We can repair cracks and
dents. In cases of severely deteriorated parts, filling pits,
repairing cracks and dents can be achieved by hand filling and
polishing. We do not grind out the pits. This is the most difficult
metal to refinish and your parts are only handled by experienced
personnel. All pieces go through an acid copper plate and buffing
process. This takes a great deal of time and is very labor intensive
but results in the best possible finish. Sometimes parts may be too
deteriorated to restore to perfect condition. You will be notified in
such a case. We reserve the right to refuse orders that will not be
satisfactory to us.
|
|
We
plate all types of steel. The final finish on a steel part is related
to the age, condition and type of steel the part is made of. Old,
rusted, pitted, deteriorated steel can be restored if there is enough
metal left to work with. Sometimes the actual condition of the part
cannot be known until the part is stripped. We can repair holes,
cracks and dents in steel parts. Cast iron parts are porous and
extremely rough and may not polish out and plate to a mirror finish.
You will be notified if your steel part is in a condition that will
not result in a proper finish. New parts generally turn out the best.
|
|
Parts
are stripped, polished or blasted and iron phosphate coated. The
powder paint is electrostatically applied then heat cured. Once cured
this process provides a hard durable finish which is resistant to
chipping, peeling and scratching. Hundreds of color choices are
available. High gloss, semi gloss, flat, textured, wrinkle,
translucent and fluorescent finishes are available.
|
|
Commercial
Production Services |
|
We
have a complete in-house commercial production service, offering
production polishing, hand rack and barrel plating, powder coating
with fast turn around. For commercial production quotes call or fax
copy of prints. |
|
|
|
|
Back to Top
|
| |
|
|
|
|
|
|
|
